How to Register a Cordless Handset to a Base

Locate your cordless base

The yealink W60B Base looks like the image below.

Put the Base in Pairing Mode

Press and hold the WiFi symbol until the handset light begins to blink

Registering the Handset

There are two instances you would need to register your cordless handset. The first would be it's brand new out of the box, the second is an existing handset needs to be registered back.

Registering a New Handset

1. Press the reg key on the bottom left of the screen
2. Once the base is found, press the OK button in the bottom right
3. Enter the PIN of 0000 and press OK
4. Your handset should now subscribe to the base and start working

Registering an Existing Handset

1. Press the OK button in the center of the cordless phone
2. Using the arrow keys, navigate to the Settings icon
3. Scroll down to Registration and then press OK
4. Press OK on Register Handset
5. Find an Open Base slot if the first one has a MAC address populated already. Then press the OK button
6. Once the base is found, press the OK button on the bottom right of the screen
7. Enter the PIN of 0000 and press OK
8. Your handset should now be subscribed to the base and start working

If you have any questions about this process, or if you need assistance, please reach out to our Support Team by dialing HELP(4357) on your desk phone, calling (972) 924-6488, or emailing help@vestednetworks.com.